Mipec 4MILL300ATC+   - Rapid PCB & Antenna prototyping

With a MIPEC PCB prototyping solutions, you can produce PCBs in your own lab – fast, environmentally friendly, and with high accuracy. It is no more necessary to wait days or weeks for your boards to be delivered from your external suppliers. With MIPEC prototyping method , you can proceed directly from the design phase to the implementation and testing of your design in the shortest possible period. If any design error is discovered, a new PCB can be produced almost immadiately and you can run your tests again.


MIPEC's prototyping solutions have numerous advantages:

  • You will reduce fabrication of your PCB prototypes from weeks to just a few hours,
  • You are absolutely independent from external PCB suppliers,
  • Your flexibility will increase enormly,
  • You will reduce your time to market, 
  • Your design stays inside the company for increased security.

4MILL300ATC+ is PCB milling and drilling machine with automatic tool change system. Even 4MILL300ATC+ is just a small toptable machine, it is equipped with 12 positions tool changer suitable for all 3,175mm tools. Spindle motor is equiped with pneumatic clamp which requires compressed air of 0,6MPa.


As well as 4MILL300ATC+ the machine is always delivered together with software TrackMaker. It is complete software package for gerber import, editing, toolpaths generation and PCB processing. 




Model : 4MILL300ATC+

(Single and double sided PCB Milling, drilling and Engraving  RF Antenna Design System)



Max. Working area:

240 x 180 x 30mm (Z)

Milling spindle:

High Speed spindle 70000 RPM, software controlled brushless motor


1 μm


± 0.005 mm


12 positions Automatic


1/8 Inch (3.175mm)

Milling depth adjustment:

μm precise depth adjustment

Drilling speed:

125 Drills/min

Travel speed X/Y:


Drilling in mm

0.3 mm

X/Y/Z drives:

hybride motors

Isolation & Track Width

Upto 0.1mm (4 mil)


Yes (Optional)

Minimum track size

0.1 mm (4 mil)

Minimum gap size

0.1 mm (4 mil)

Tool Length Detect & Surface Detect

Auto with floating head technology for surface irregularity detection

Machine table:

flat milled aluminium table with central T-slot

Interface to PC

USB 2.0

OS compatibility

Windows 10 or higher


W-420 x D-455 x H-435mm



Power supply:

110/230V, 50-60Hz


TrackMaker (A cam software which can import Gerber D&X, Excellon, ODB++, DXF etc.

Dust Extractor (Vaccum system)

Yes Included with automatic on/off switching

Acoustic cabinet

Yes, Included


Gerber RS-274X files; Excellon Drill and Definition files; AutoCAD DXF 2D files

Air compressor for ATC


Material Supported

FR4, Copper Clad, Acrylic etc.


Software : 4MILL300ATC+ Machine is delivered together with USB dongle based license of TrackMaker software. Add-on accessories consisting from:


   Tool Set:


Universal cutter, Micro cutter, Contour       

router, End mill, Drill Bits


Copper plates FR4, format A5, 2 sided

Copper plates FR4, format A5, 1 sided

Drill underlay material, format A5

Cleaning pads, Sticky tape


Data Sheet Literature
Mipec - 4MILL300ATC+ Model Datasheet
MIPEC4MILL300ATC+ Datasheet.pdf
Adobe Acrobat Document 518.3 KB